Giant Drinking Jenga

Giant Drinking Jenga

I built a giant jenga drinking game as a Christmas present to my brother who has everything, except a giant jenga drinking game.
I didn't go full on 2×4's because that would've been dangerous had I had to slam on the brakes
Converted the picnic table into a makeshift chop shop
I had enough wood for 4 sets
Carved out the logo on rubber to stamp the sides using a sepia colored permanent ink pad
A lot of stamping
I also picked up letter stamps from the local hobby shop to stamp out the rules. Then applied a thin coat of wax paste to make them slippery
Created a carrying case out of 1×10 plank. Banana for scale
Cut the handles with hole drill bit. Drilled two holes about 4" apart, then used a fen saw to remove the middle. Finished it up with a route red for comfy grabbing
I transferred the logo by first printing it out in reverse on a sheet of paper, traced the reversed image with a pencil. Taped the penciled side down to the wood and rubbed the sheet. When I pulled the paper off, an outline of the logo was left on the side of the box. I retraced the outline with black permanent marker
The bottom of the box was is also waxed and acts an emergency play area in case outdoor drinking is required
This is a shot of all 56 tiles and the stamped rules
Source : Jrinka from Reddit